T-Stop für VA 1

Nickel-plated brass T-stop for the Varga VA 1 table saw, for precise saw blade positioning in the guide rail.

>

Application: T-Stop for the Saw Blade in the Guide Rail

>

Suitable for: VA 1

>

Product Type: Spare Part

Product Number: 70-1-4006

T-Stop für VA 1

The T-stop, made of nickel-plated brass, is a spare part for the Varga VA 1 table saw and serves as a precise end stop for the saw blade within the guide rail. It ensures exact blade positioning, supporting clean and repeatable cuts. The T-stop is glued into the guide rail and must then be re-cut. For correct installation, it is important to follow the corresponding instructions.

Technical Specifications:

Suitable for: VA 1
Dimensions: 45 x 10 x 4 mm (1.85 x 0.39 x 0.16 in)
Weight: 12 g (0.03 lbs)

Manufacturer

VARGA SYSTEM GmbH

Hainkämpe 5
28832 Achim
Germany
Email: info@varga-system.com

Warnings

The T-Stop may only be installed or replaced when the table saw is completely switched off and disconnected from the power supply. Improper installation or use can lead to malfunctions, damage to the machine or injury. Do not use the T-Stop if it is damaged, bent or loose. The T-stop is intended exclusively for use with the Varga VA 1 table saw and must not be used in other machines.

Safety Instructions

Before commissioning, check that the T-stop has been correctly glued in place and cleanly recut. Use only original spare parts to ensure the precision and safety of the machine. After assembly, carry out a test run with appropriate safety measures to confirm correct operation.

Intended Use

The T-stop serves as a precise end stop for the saw blade in the guide rail of the Varga VA 1 table saw and ensures exact positioning for clean, repeatable cuts.