Lift Cable

Lifting cable for Varga VA 21-7, VA 21-15, and VA 31-15 table saws, supplied with two M4 slotted screws.

>

Application: Lifting the Blade Housing

>

Suitable for: VA 21-7, VA 21-15, VA 31-15

>

Product Type: Spare Part

Product Number: 70-21-6011

Lift Cable

The lifting cable is a spare part designed for the Varga table saws VA 21-7, VA 21-15, and VA 31-15. It enables safe and easy lifting of the blade housing.

Technical Specifications:

Suitable for: VA 21-7, VA 21-15, VA 31-15
Dimensions: 64 x 7 x 50 mm (2.52 x 0.28 x 1.97 in)
Weight: 7 g (0.015 lbs)

Manufacturer

VARGA SYSTEM GmbH

Hainkämpe 5
28832 Achim
Germany
Email: info@varga-system.com

Warnings

The lifting cable may only be installed or used when the machine is completely switched off and disconnected from the power supply. Improper installation or use can result in injury to operating personnel or damage to the machine. The lifting cable must not be used if it shows visible damage such as broken wires, corrosion or deformation. It is intended exclusively for use with models VA 21-7, VA 21-15 and VA 31-15; use on other machines is not permitted.

Safety Instructions

Before each use, check that the lifting cable and the screws supplied are securely fastened. To ensure operational safety, only original spare parts may be used. After installation, carefully check the function of the lifting cable before starting up the machine.

Intended Use

The lifting cable is used to safely and easily lift the cutter or saw blade housing on the Varga table saws models VA 21-7, VA 21-15 and VA 31-15. It is attached using the supplied M4 slotted screws and enables controlled handling when lifting and lowering the housing.