Guide Rail Tongue w/ M4 x 6 Screw for VA 1, VA 10

Guide rail tongue for Varga VA 1 and VA 10 table saws, ensuring precise guidance of the blade cover casing; includes M4×6 screw.

>

Application: Precise Guidance of the Blade Housing

>

Suitable for: VA 1, VA 10

>

Product Type: Spare Part

Product Number: 70-1-8004

Guide Rail Tongue w/ M4 x 6 Screw for VA 1, VA 10

Precisely manufactured Guide Rail Tongue for the blade cover casing – spare part for the Varga table saws VA 1 and VA 10. It ensures accurate guidance of the blade cover casing, enabling a stable and clean cutting process. The included M4 x 6 screw allows for easy and secure mounting. Ideal as a spare part for reliable maintenance and long-term, precise use of Varga table saws.

Technical Specifications:

Suitable for: VA 1, VA 10
Dimensions: 34 x 20 x 1,8 mm (1.34 x 0.79 x 0.07 in)
Weight: 11 g (0.024 lbs)

Manufacturer

VARGA SYSTEM GmbH

Hainkämpe 5
28832 Achim
Germany
Email: info@varga-system.com

Warnings

The guide rail tongue may only be mounted, adjusted or replaced when the device is switched off and disconnected from the mains. During sawing, there is a risk of injury from the rotating saw blade and moving machine parts. Damaged, bent or worn guide tongues must not be used, as they impair the precise guidance of the workpiece and can cause an increased risk of accidents. Improper installation or the use of unauthorised spare parts can lead to malfunctions and compromise the operational safety of the machine.

Safety Instructions

Before assembly, ensure that all parts are clean, undamaged and free of residue. The guide tongue must be correctly aligned and mounted with the supplied M4 x 6 screw, tightened firmly but not excessively. After each maintenance or cleaning, check that it is securely fastened. Only original spare parts or components approved by the manufacturer may be used to ensure compliance with safety requirements. Changes, modifications or unauthorised repairs are not permitted and will result in a loss of product safety. Assembly and maintenance may only be carried out by trained or instructed specialist personnel.

Intended Use

The precision-manufactured guide rail tongue for the cutter housing is a spare part for the Varga VA 1 and VA 10 table saws. It is used to guide the cutter housing precisely, thereby ensuring stable, accurate and clean sawing.