Guide Rail Tongue w/ M4 x 10 Screws for VA 11, VA 21-7, VA 21-15, VA 31-15

Guide rail tongue for Varga VA 11, VA 21-7, VA 21-15 and VA 31-15 table saws, ensuring accurate guidance of the blade cover casing; includes two M4 x 10 screws.

>

Application: Precise Guidance of the Blade Housing

>

Suitable for: VA 11, VA 21-7, VA 21-15, VA 31-15

>

Product Type: Spare Part

Product Number: 70-11-8004

Guide Rail Tongue w/ M4 x 10 Screws for VA 11, VA 21-7, VA 21-15, VA 31-15

Precisely manufactured Guide Rail Tongue for the blade cover casing – spare part for the Varga table saws VA 11, VA 21-7, VA 21-15 and VA 31-15. It ensures accurate guidance of the blade cover casing , enabling a stable and clean cutting process. The item includes two M4 x 10 screws, allowing for quick and secure installation. Perfect as a spare part for easy maintenance and long-term precise operation of the machine.

Technical Specifications:

Suitable for: VA 11, VA 21-7, VA 21-15, VA 31-15
Dimensions: 38 x 34 x 1,8 mm (1.50 x 1.34 x 0.07 in)
Weight: 17 g (0.04 lbs)

Manufacturer

VARGA SYSTEM GmbH

Hainkämpe 5
28832 Achim
Germany
Email: info@varga-system.com

Warnings

The guide rail tongue may only be mounted, adjusted or replaced when the device is switched off and disconnected from the mains. During sawing, there is a risk of injury from the rotating saw blade and moving machine parts. Damaged, bent or worn guide tongues must not be used, as they impair the precise guidance of the workpiece and can cause an increased risk of accidents. Improper installation or the use of unauthorised spare parts can lead to malfunctions and compromise the operational safety of the machine.

Safety Instructions

Before assembly, ensure that all parts are clean, undamaged and free of residue. The guide tongue must be correctly aligned and mounted with the supplied M4 x 6 screw, tightened firmly but not excessively. After each maintenance or cleaning, check that it is securely fastened. Only original spare parts or components approved by the manufacturer may be used to ensure compliance with safety requirements. Changes, modifications or unauthorised repairs are not permitted and will result in a loss of product safety. Assembly and maintenance may only be carried out by trained or instructed specialist personnel.

Intended Use

The precisely manufactured guide rail tongue for the cutter housing is a spare part for the Varga table saws VA 11, VA 21-7, VA 21-15 and VA 31-15. It is used for the exact guidance of the cutter housing and thus ensures a stable, precise and clean sawing process.