Depth Regulator for VA 2

>

Application: Precise Workpiece Positioning

>

Suitable for: VA 2

>

Product Type: Spare Part

Product Number: 70-2-7006

Depth Regulator for VA 2

The depth regulator, made of anodized aluminum, is a spare part for the Varga edge milling unit VA 2. The material thickness can be precisely adjusted using two set screws on the guide rail. It ensures even chamfering and delivers clean, accurate results.

Technical Specifications:

Suitable for: VA 2
Dimensions: 300 x 18 x 14 mm (11.81 x 0.71 x 0.55 in)
Weight: 121 g (0.27 lbs)

Manufacturer

VARGA SYSTEM GmbH

Hainkämpe 5
28832 Achim
Germany
Email: info@varga-system.com

Warnings

To avoid injury, do not assemble or adjust the depth regulator while the machine is running. Do not use damaged or loose parts, as the depth regulator may come loose during operation and cause an accident. Do not apply excessive pressure to the depth regulator to avoid deformation or breakage.

Safety Instructions

Before use, ensure that the depth regulator is undamaged and correctly mounted on the Varga VA 2 edge milling machine. Assembly and adjustment may only be carried out when the machine is switched off and disconnected from the power supply. The adjusting screws must be tightened securely to ensure safe guidance and a stable hold during the milling process.

Intended Use

The depth regulator is used to guide the workpiece safely and precisely on the Varga VA 2 edge milling machine in order to ensure uniform removal of the facet and clean edges.