Carbide Cutter VA 2, 24 Teeth

Original Varga carbide cutter for the VA 2 edge milling unit, 120 mm diameter with 24 teeth for precise, clean cuts.

>

Diameter: Ø 120 mm × 1.8 mm

>

Amount of Teeth: 24

>

Speed: 15.000 min⁻¹

>

Suitable for: VA 2

>

Product Type: Tools and Consumables

Product Number: 70-2-7001

Carbide Cutter VA 2, 24 Teeth

The original Varga carbide cutter is a spare part for the Varga edge milling unit VA 2. With a diameter of 120 mm, a 20 mm bore, and a cutting width of 1.8 mm, it ensures precise and clean cuts. Equipped with 24 durable teeth, it delivers efficient material removal and long service life.

Technical Specifications:

Suitable for: VA 2
Diameter: ⌀ 120 mm × 1.8 mm (4.72 x 0.07 in)
Speed: 15,000 rpm
Amount of Teeth: 24

Manufacturer

VARGA SYSTEM GmbH

Hainkämpe 5
28832 Achim
Germany
Email: info@varga-system.com

Warnings

The saw blade is extremely sharp and can cause cuts. Flying chips can cause eye injuries. Wear safety goggles. Overloading the saw blade can lead to breakage and flying parts. Improper installation can cause safety risks.

Safety Instructions

Use protective gloves when assembling or disassembling the saw blade. Wear personal protective equipment such as goggles and hearing protection during operation. Only cut materials within the recommended thickness and hardness. Check the saw blade regularly for damage and replace it if necessary. Carry out assembly only according to the instructions in the manual.

Intended Use

The product is designed for precise cutting of plastics, aluminum, brass and other non-ferrous metals in Varga table saws.